The perfect finish for your wrapped profiles. This Automatic End Trimming Machine is designed to cut the excess foil from the front and back ends of wrapped mouldings. Featuring high-speed saw blades and precise sensors, it eliminates manual trimming, ensuring a clean, flush cut every time.
| Working width | 1320mm |
| thickness | 2-80mm |
| Min. length | 300mm |
| Dimensions | 3500*2400*1500mm |
The TS-ET Automatic End Trimming Machine is an essential post-processing unit for profile wrapping lines. After a profile is wrapped with PVC or veneer, there is always excess material overhanging at both ends. Manual trimming is slow and inconsistent.
This machine solves that problem by using dual high-speed saw motors to automatically detect the profile ends and trim the film flush with the substrate. It handles various materials including MDF, solid wood, WPC, and aluminum. It can be installed directly after the wrapping machine for a fully automated workflow.
· Large-plate production line: Large-plate membrane lamination and cutting.
| Model | TS-2500# |
| Name | Short – edge trimming machine |
| Working width | 1320mm |
| thickness | 2-80mm |
| Min. length | 300mm |
| Dimensions | 3500*2400*1500mm |
Video Resources :
No. The machine uses non-contact sensors to detect the position and high-speed blades that cut only the excess film without chipping the wood substrate.
Yes. It is usually equipped with a sensor or encoder to synchronize with the wrapping machine’s speed, ensuring seamless inline operation.
It is best suited for straight linear profiles. For curved ends, a CNC trimming center would be required.
Taisan Professional Coating Equipment Service